![]() L 55.5.5.2/32 is directly connected, Ethernet0/2Ħ6.0.0.0/8 is variably subnetted, 2 subnets, 2 masksĬ 66.6.6.0/30 is directly connected, Ethernet0/1 L 44.4.4.2/32 is directly connected, Ethernet0/0 R5: 44.0.0.0/8 is variably subnetted, 2 subnets, 2 masksĬ 44.4.4.0/30 is directly connected, Ethernet0/0 ![]() L 202.0.0.1/32 is directly connected, Loopback7 L 201.0.0.1/32 is directly connected, Loopback6Ģ02.0.0.0/24 is variably subnetted, 2 subnets, 2 masksĬ 202.0.0.0/24 is directly connected, Loopback7 L 200.0.0.1/32 is directly connected, Loopback5Ģ01.0.0.0/24 is variably subnetted, 2 subnets, 2 masksĬ 201.0.0.0/24 is directly connected, Loopback6 L 22.2.2.1/32 is directly connected, Ethernet0/0ĥ5.0.0.0/8 is variably subnetted, 2 subnets, 2 masksĬ 55.5.5.0/30 is directly connected, Ethernet0/2 L 11.1.1.2/32 is directly connected, Ethernet0/1Ģ2.0.0.0/8 is variably subnetted, 2 subnets, 2 masksĬ 22.2.2.0/30 is directly connected, Ethernet0/0 R2 11.0.0.0/8 is variably subnetted, 2 subnets, 2 masksĬ 11.1.1.0/30 is directly connected, Ethernet0/1 ![]() Route is advertised and installed in the routing table but I cannot ping loopback int 192.168.20.1 from other routers other than directly connected R2.Īggregate-address 200.0.0.0 252.0.0.0 summary-only ![]() Would anyone know how to get this functionality? Thanks in advance.I'm preparing myself for new CCNP exam and working on a lab where I have 5 routers running BGP, R1 advertises network 192.168.20.0 and the Loopback1 is 192.168.20.1. I tried to set this up using port forwarding in LuCI, but it doesn't seem to work. In the scenario that I would want, all traffic from LAN to my public IP would be forwarded to the router itself (destination IP changed to 127.0.0.1), which would then redistribute it based on port forwarding rules, UPnP etc. The problem is that in my network configuration, the OpenWRT router doesn't have the public IP assigned to its WAN interface, because it sits behind an ISP router with 1:1 NAT.įrom my understanding, that means that it can't know that traffic to this public IP is in fact destined towards it, and proceeds to route it to the ISP router, which probably throws it away. For more information, see Troubleshooting virtual machine TCP/IP issues by pinging the loopback address (1008206). Next ping the loopback address to verify that TCP/IP is working correctly. ![]() from phone carrier), it works as it should, but the request times out if I try to do it from within.įrom searching on the internet, it seems that this problem is quite common, and the solution always is to enable some loopback/reflection of router WAN IP to LAN. If pings to another VM on the same host same port group are not successful, then the issue is within the VM itself (in the guest OS or VM adapter settings). If I try to ping/access some service on my public IP from outside of LAN (i.e. I recently got a new ISP and I am now facing an issue with accessing my own (static) public IP from within the network. ![]()
0 Comments
Leave a Reply. |
AuthorWrite something about yourself. No need to be fancy, just an overview. ArchivesCategories |